Step 5. Connect blinker plate assemblies to reflector rim as shown in Figure 6. Use 1/4 by 5/8 in (16 mm) bolts, flat washers, lock washers and nuts as shown. Tighten bolts to form blinker assembly around shape of reflector.
Step 6. When making connection to feed flange, be sure to use gasket between flanges. Join flanges with 8-32 by 1 in (25 mm) screws, split lock washers and nuts. (See special note in parts list. Use alien wrench to tighten screws.
| Parts List for Type 39130-1 Antenna |
||
|---|---|---|
| Type No. | Description | Qty |
| 201235-2 | 2-Foot Mount, consists of: | 1 |
| 11809-18 | Hose Clamp | 1 |
| 9974-64 | 1/2 Lock Washer | 4 |
| 14179 | Half Clamp Base | 1 |
| 14178 | Hose Clamp Cap | 1 |
| 9934-179 | 1/2 x 4-1/2 in Lg. Stud | 1 |
| 9934-222 | 1/2 x 6 in Lg. Stud | 1 |
| 9963-186 | 1/2 x 1-1/2 in H.H.M.B. | 1 |
| 9997-57 | 1/2 Flat Washer | 3 |
| 9999-61 | 1/2 Hex Nut | 7 |
| 40688-2 | Elevation Adapter 45° | 1 |
| 9974-17 | 5/16 Split Lock Washer | 2 |
| 9999-59 | 5/16 Hex Nut | 2 |
| 202425 | Reflector Assembly | 1 |
| 38925-10 | Feed Assembly | 1 |
| 202394 | Blinker Plate Kit, consists of: | 1 |
| 202393 | Blinker Plate Assembly | 2 |
| 9999-57 | 1/4 Nut | 6 |
| 9974-15 | 1/4 Lock Washer | 6 |
| 9997-42 | 1/4 Flat Washer | 6 |
| 9963-134 | 1/4 x 5/8 in H.H.M.B. | 6 |
| 202420 | Hardware Kit, consists of: | 1 |
| 202419 | Clamp | 4 |
| 9963-75 | 1/4 x 3/4 in Lg. H.H.M.B. | 4 |
| 9974-15 | 1/4 Lock Washer | 4 |
| 45597-90 | CPR90 Flange Hardware Kit, consists of: |
1 |
| 9903-18 | Allen Wrench | 1 |
| 9972-50 | 8-32 x 1 in Lg. S.H.C.S. | 8 |
| 9998-54 | 8-32 Hex Nut | 8 |
| 9974-70 | No. 8 Split Lock Washer | 8 |
| 9972-56* | 8-32 x 1.38 in Lg. S.H.C.S. | 2 |
| 31861 | Flange Gasket | 1 |
| * These longer screws are used only when feed flange is connected to Type 190EW or Type 1107EW connectors. | ||
