"SPOT-1500" Gateway is designed to provide two-way
interconnection between THURAYA GMPCS and PSTN/PLMN. On PSTN side,
"SPOT-1500" interfaces PSTN via 1 E1 (G.703) channel in minimal
configuration. In start-up configuration, interface towards Thuraya
Space Segment provides 12 access channels serving up to 1000 users
at 6 mErl Busy Hour traffic per subscriber. "SPOT-1500" Gateway
supports both DSS1 or R2 signaling. Additional features of
"SPOT-1500" Gateway include incoming/outgoing calls charging,
user-defined change of signaling type and numbering plan, subscriber
profile addition and termination, monitoring of calls set-up and
routing.
Capacity upgrade
As the number of subscribers or traffic density
grows, additional "SPOT-1500" Channel (CU) and Switching units (SU)
are to be installed into standard 19" rack and powered from the same
power supply unit (PSU). One rack can be used to accommodate several
Channel and Switching Units. PSTN interconnection capacity can be
increased by incremental addition of n*E1 channels.
Making calls to PSTN/PLMN through "SPOT-1500" Gateway
Call set-up procedure consists of 2 steps. When
making call to PSTN/PLMN telephone number, Thuraya subscriber dials
one of dedicated numbers allocated to "SPOT-1500" Gateway (step 1).
The Gateway provides Thuraya subscriber with one of free 30 channels
to the nearest PSTN/PLMN switch and lets dial destination number
(step 2).
Receiving calls from PSTN/PLMN through "SPOT-1500"
Gateway
Similarly to mobile-originated calls set-up,
PSTN/PLMN subscriber dials one of access numbers allocated to
"SPOT-1500" Gateway (step 1), and the then the number of Thuraya
subscriber.
Optionally, regional mobile satellite operator may
negotiate purchase or lease of PSTN numbering resource from operator
that provides interconnection to PSTN/PLMN switch. In this case any
PSTN/PLMN subscriber will reach Thuraya subscriber by dialing just
one telephone number. In this case for external world Thuraya
subscriber will have two numbers:
+88216-XXX-XX-XX and PSTN number
+(XXX)-XX-XXX-XX-XX. In most cases this will result in significant
savings for calling party.
Basic configuration and technical features
Start-up configuration of "SPOT-1500" Gateway (1 CU)
includes:
-
Switching Unit HW/SW
-
Channel Unit with GPS Unit and LNA RF LNA/Power
amplifier
-
19" rack/installation materials
-
Outdoor antenna, cables and connectors
-
Power Supply Unit
-
Back-up power supply (optional)