\documentclass[11pt, a4paper]{article}
\usepackage[a4paper, text={16cm,25cm}]{geometry}

%\VignetteIndexEntry{Simulations for Robust Regression Inference in Small Samples}
%\VignettePackage{robustbase}
%\VignetteDepends{xtable,ggplot2,GGally,RColorBrewer,grid,reshape2}

\usepackage{amsmath}
\usepackage{natbib}
\usepackage[utf8]{inputenc}

\newcommand{\makeright}[2]{\ifx#1\left\right#2\else#1#2\fi}
\newcommand{\Norm}[2][\left]{\mathcal N   #1( #2 \makeright{#1}{)}}
\newcommand{\norm}[1]   {\| #1 \|}
\newcommand{\bld}[1]{\boldsymbol{#1}} % shortcut for bold symbol
\newcommand{\T}[1]      {\texttt{#1}}
\DeclareMathOperator{\wgt}{w}
\DeclareMathOperator{\var}{var}
\DeclareMathOperator{\diag}{diag}
\DeclareMathOperator{\median}{median}
\DeclareMathOperator{\mad}{mad}
\DeclareMathOperator{\Erw}{\mathbf{E}}


\SweaveOpts{prefix.string=plot, eps = FALSE, pdf = TRUE, strip.white=true}
\SweaveOpts{width=6, height=4}

\usepackage[noae]{Sweave}
\begin{document}
\setkeys{Gin}{width=\textwidth}
\setlength{\abovecaptionskip}{-5pt}

<<initial-setup, echo=FALSE, results=hide>>=
## set options
options(width=60,
        warn=1) # see warnings where they happen (should eliminate)

## number of workers to start
if(FALSE) {## good for pkg developers
    options(cores=  max(1, parallel::detectCores() - 2))
} else { ## CRAN allows maximum of 2:
    options(cores= min(2, parallel::detectCores()))
}

## Number of Repetitions:
N <- 1000

## get path (= ../inst/doc/ in source pkg)
robustDoc <- system.file('doc', package='robustbase')
robustDta <- robustDoc

## initialize (packages, data, ...):
source(file.path(robustDoc, 'simulation.init.R')) # 'xtable'

## set the amount of trimming used in calculation of average results
trim <- 0.1

<<graphics-setup,echo=FALSE,results=hide>>=
## load required packages for graphics
stopifnot(require(ggplot2),
          require(GGally),# for ggpairs() which replaces ggplot2::plotmatrix()
          require(grid),
          require(reshape2))
source(file.path(robustDoc, 'graphics.functions.R'))
`%||%` <- function (x, orElse) if (!is.null(x)) x else orElse

## set ggplot theme
theme <- theme_bw(base_size = 10)
theme$legend.key.size <- unit(1, "lines")# was 0.9 in pre-v.3 ggplot2
theme$plot.margin <- unit(c(1/2, 1/8, 1/8, 1/8), "lines")# was (1/2, 0,0,0)
theme_set(theme)
## old and new ggplot2:
stopifnot(is.list(theme_G <- theme$panel.grid.major %||% theme$panel.grid))

## set default sizes for lines and points
update_geom_defaults("point",  list(size = 4/3))
update_geom_defaults("line",   list(size = 1/4))
update_geom_defaults("hline",  list(size = 1/4))
update_geom_defaults("smooth", list(size = 1/4))
## alpha value for plots with many points
alpha.error <- 0.3
alpha.n <- 0.4

## set truncation limits used by f.truncate() & g.truncate.*:
trunc <- c(0.02, 0.14)
trunc.plot <- c(0.0185, 0.155)

f.truncate <- function(x, up = trunc.plot[2], low = trunc.plot[1]) {
  x[x > up] <- up
  x[x < low] <- low
  x
}

g.truncate.lines <- geom_hline(yintercept = trunc,
                               color = theme$panel.border$colour)
g.truncate.line <- geom_hline(yintercept = trunc[2],
                              color = theme$panel.border$colour)
g.truncate.areas <- annotate("rect", xmin=rep(-Inf,2), xmax=rep(Inf,2),
                             ymin=c(0,Inf), ymax=trunc,
                             fill = theme_G$colour)
g.truncate.area <- annotate("rect", xmin=-Inf, xmax=Inf,
                            ymin=trunc[2], ymax=Inf,
                            fill = theme_G$colour)

legend.mod <- list(`SMD.Wtau` = quote('SMD.W'~tau),
                   `SMDM.Wtau` = quote('SMDM.W'~tau),
                   `MM.Avar1` = quote('MM.'~Avar[1]),
                   `MMqT` = quote('MM'~~q[T]),
                   `MMqT.Wssc` = quote('MM'~~q[T]*'.Wssc'),
                   `MMqE` = quote('MM'~~q[E]),
                   `MMqE.Wssc` = quote('MM'~~q[E]*'.Wssc'),
                   `sigma_S` = quote(hat(sigma)[S]),
                   `sigma_D` = quote(hat(sigma)[D]),
                   `sigma_S*qE` = quote(q[E]*hat(sigma)[S]),
                   `sigma_S*qT` = quote(q[T]*hat(sigma)[S]),
                   `sigma_robust` = quote(hat(sigma)[robust]),
                   `sigma_OLS` = quote(hat(sigma)[OLS]),
                   `t1` = quote(t[1]),
                   `t3` = quote(t[3]),
                   `t5` = quote(t[5]),
                   `cskt(Inf,2)` = quote(cskt(infinity,2))
                   )
@% end{graphics-setup}


\title{Simulations for Sharpening Wald-type Inference in Robust Regression
  for Small Samples}
\author{Manuel Koller}
\maketitle
\tableofcontents

\section{Introduction}
In this vignette, we recreate the simulation study of \citet{KS2011}. This
vignette is supposed to complement the results presented in the above cited
reference and render its results reproducible. Another goal is to provide
simulation functions, that, with small changes, could also be used for other
simulation studies.

Additionally, in Section~\ref{sec:maximum-asymptotic-bias}, we calculate
the maximum asymptotic bias curves of the $\psi$-functions used in the
simulation.

\section{Setting}
The simulation setting used here is similar to the one in
\citet{maronna2009correcting}. We simulate $N = \Sexpr{N}$ repetitions. To
repeat the simulation, we recommend using a small value of $N$ here, since
for large $n$ and $p$, computing all the replicates will take days.

\subsection{Methods}
We compare the methods
\begin{itemize}
\item MM, SMD, SMDM as described in \citet{KS2011}. These methods are
  available in the package \T{robustbase} (\T{lmrob}).
\item MM as implemented in the package \T{robust}  (\T{lmRob}). This method
  will be denoted as \emph{MMrobust} later on.
\item MM using S-scale correction by $q_{\rm T}$ and $q_{\rm E}$ as
  proposed by \citet{maronna2009correcting}.

  $q_{\rm T}$ and $q_{\rm E}$ are defined as follows.
  \begin{equation*}
    q_{\rm E} = \frac{1}{1 - (1.29 - 6.02/n)p/n},
  \end{equation*}
  \begin{equation*}
    \hat q_{\rm T} = 1 + \frac{p}{2n}\frac{\hat a}{\hat b\hat c},
  \end{equation*}
  where
  \begin{equation*}
    \hat a = \frac{1}{n}\sum_{i=1}^n
    \psi\left(\frac{r_i}{\hat\sigma_{\rm S}}\right)^2,
    \hat b = \frac{1}{n}
    \sum_{i=1}^n\psi'\left(\frac{r_i}{\hat\sigma_{\rm S}}\right),%'
    \hat c = \frac{1}{n}\sum_{i=1}^n
    \psi\left(\frac{r_i}{\hat\sigma_{\rm S}}\right)
    \frac{r_i}{\hat\sigma_{\rm S}},
  \end{equation*}
  with $\psi = \rho'$,%'
  $n$ the number of observations, $p$ the number of
  predictor variables, $\hat\sigma_{\rm S}$ is the S-scale estimate and
  $r_i$ is the residual of the $i$-th observation.

  When using $q_{\rm E}$ it is necessary to adjust the tuning constants of
  $\chi$ to account for the dependence of $\kappa$ on $p$. For $q_{\rm T}$
  no change is required.

  This method is implemented as \T{lmrob.mar()} in the source file
  \T{estimating.functions.R}.
\end{itemize}

\subsection{$\psi$-functions}
We compare \emph{bisquare}, \emph{optimal}, \emph{lqq} and \emph{Hampel}
$\psi$-functions. They are illustrated in Fig.~\ref{fig:psi.functions}. The
tuning constants used in the simulation are compiled in
Table~\ref{tab:psi-functions}. Note that the \emph{Hampel} $\psi$-function
is tuned to have a downward slope of $-1/3$ instead of the originally
proposed $-1/2$. This was set to allow for a comparison to an even slower
descending $\psi$-function.

%% generate table of tuning constants used for \psi functions
\begin{table}[ht]
\begin{center}
<<tab-psi-functions, results=tex, echo=FALSE>>=
## get list of psi functions
lst <- lapply(estlist$procedures, function(x) {
  if (is.null(x$args)) return(list(NULL, NULL, NULL))
  if (!is.null(x$args$weight))
    return(list(x$args$weight[2],
                round(f.psi2c.chi(x$args$weight[1]),3),
                round(f.eff2c.psi(x$args$efficiency, x$args$weight[2]),3)))
  return(list(x$args$psi,
              round(if (is.null(x$args$tuning.chi))
                    lmrob.control(psi=x$args$psi)$tuning.chi else
                    x$args$tuning.chi,3),
              round(if (is.null(x$args$tuning.psi))
                    lmrob.control(psi=x$args$psi)$tuning.psi else
                    x$args$tuning.psi,3)))
})
lst <- unique(lst) ## because of rounding, down from 21 to 5 !
lst <- lst[sapply(lst, function(x) !is.null(x[[1]]))] # 5 --> 4
## convert to table
tbl <- do.call(rbind, lst)
tbl[,2:3] <- apply(tbl[,2:3], 1:2, function(x) {
  gsub('\\$NA\\$', '\\\\texttt{NA}',
       paste('$', unlist(x), collapse=', ', '$', sep='')) })
tbl[,1] <- paste('\\texttt{', tbl[,1], '}', sep='')
colnames(tbl) <- paste('\\texttt{', c('psi', 'tuning.chi', 'tuning.psi'),
                       '}', sep='')
require("xtable") # need also print() method:
print(xtable(tbl), sanitize.text.function=identity,
      include.rownames = FALSE, floating=FALSE)
@ %def
\vspace{15pt}
\caption{Tuning constants of $\psi$-functions used in the simulation.}
\label{tab:psi-functions}
\end{center}
\end{table}


\begin{figure}
\begin{center}
<<fig-psi-functions, fig=TRUE, echo=FALSE>>=
d.x_psi <- function(x, psi) {
  cc <- lmrob.control(psi = psi)$tuning.psi
  data.frame(x=x, value=Mpsi(x, cc, psi), psi = psi)
}
x <- seq(0, 10, length.out = 1000)
tmp <- rbind(d.x_psi(x, 'optimal'),
             d.x_psi(x, 'bisquare'),
             d.x_psi(x, 'lqq'),
             d.x_psi(x, 'hampel'))
print( ggplot(tmp, aes(x, value, color = psi)) +
       geom_line(lwd=1.25) + ylab(quote(psi(x))) +
       scale_color_discrete(name = quote(psi ~ '-function')))
@
\end{center}
\caption{$\psi$-functions used in the simulation.}
\label{fig:psi.functions}
\end{figure}

\subsection{Designs}
Two types of designs are used in the simulation: fixed and random designs.
One design with $n=20$ observations, $p=1+3$ predictors and strong leverage
points. This design also includes an intercept column. It is shown in
Fig.~\ref{fig:design-predict}. The other designs are random, i.e.,
regenerated for every repetition, and the models are fitted without an
intercept. We use the same distribution to generate the designs as for the
errors. The number of observations simulated are $n = 25, 50, 100, 400$ and
the ratio to the number of parameters are $p/n = 1/20, 1/10, 1/5, 1/3,
1/2$. We round $p$ to the nearest smaller integer if necessary.

The random datasets are generated using the following code.
<<fgen, results=hide, keep.source=TRUE>>=

f.gen <- function(n, p, rep, err) {
  ## get function name and parameters
  lerrfun <- f.errname(err$err)
  lerrpar <- err$args
  ## generate random predictors
  ret <- replicate(rep, matrix(do.call(lerrfun, c(n = n*p, lerrpar)),
                               n, p), simplify=FALSE)
  attr(ret[[1]], 'gen') <- f.gen
  ret
}

ratios <- c(1/20, 1/10, 1/5, 1/3, 1/2)## p/n
lsit <- expand.grid(n = c(25, 50, 100, 400), p = ratios)
lsit <- within(lsit, p <- as.integer(n*p))
.errs.normal.1 <- list(err = 'normal',
                       args = list(mean = 0, sd = 1))
for (i in 1:NROW(lsit))
  assign(paste('rand',lsit[i,1],lsit[i,2],sep='_'),
         f.gen(lsit[i,1], lsit[i,2], rep = 1, err = .errs.normal.1)[[1]])
@
An example design is shown in Fig.~\ref{fig:example.design}.

\begin{figure}
\begin{center}
<<fig-example-design, fig=TRUE, echo=FALSE>>=
require(GGally)
colnames(rand_25_5) <- paste0("X", 1:5) # workaround new (2014-12) change in GGally
## and the 2016-11-* change needs data frames:
df.r_25_5 <- as.data.frame(rand_25_5)
try( ## fails with old GGally and new  packageVersion("ggplot2") >= "2.2.1.9000"
print(ggpairs(df.r_25_5, axisLabels="show", title = "rand_25_5: n=25, p=5"))
)
@
\end{center}
\caption{Example random design.}
\label{fig:example.design}
\end{figure}

\subsection{Error Distributions}
We simulate the following error distributions
\begin{itemize}
\item standard normal distribution,
\item $t_5$, $t_3$, $t_1$,
\item centered skewed t with $df = \infty, 5$ and $\gamma = 2$ (denoted by
  \emph{cskt$(\infty,2)$} and \emph{cskt}$(5,2)$, respectively); as
  introduced by \citet{fernandez1998bayesian} using the \T{R} package
  \T{skewt},
\item contaminated normal, $\Norm{0,1}$ contaminated with $10\%$
  $\Norm{0, 10}$ (symmetric, \emph{cnorm}$(0.1,0,3.16)$) or
  $\Norm{4, 1}$ (asymmetric, \emph{cnorm}$(0.1,4,1)$).
\end{itemize}

\subsection{Covariance Matrix Estimators}
For the standard MM estimator, we compare ${\rm Avar}_1$ of \citet{croux03}
and the empirical weighted covariance matrix estimate corrected by Huber's
small sample correction as described in \citet{HubPR09} (denoted by
\emph{Wssc}). The latter is also used for the variation of the MM estimate
proposed by \citet{maronna2009correcting}. For the SMD and SMDM variants we
use the covariance matrix estimate as described in \citet{KS2011}
(\emph{W$\tau$}).

The covariance matrix estimate consists of three parts:
\begin{equation*}
  {\rm cov}(\hat\beta) = \sigma^2\gamma\bld V_{\bld X}^{-1}.
\end{equation*}

The SMD and SMDM methods of \T{lmrob} use the following defaults.
\begin{equation}
  \label{eq:gammatau}
  \hat\gamma =
  \frac{\frac{1}{n}\sum_{i=1}^n\tau_i^2
    \psi\left(\frac{r_i}{\tau_i\hat\sigma}\right)^2}
  {\frac{1}{n}\sum_{i=1}^n\psi'\left(\frac{r_i}{\tau_i\hat\sigma}\right)}
\end{equation}
where $\tau_i$ is the rescaling factor used for the D-scale estimate (see
\citet{KS2011}).

\noindent\textbf{Remark: } Equation \eqref{eq:gammatau} is a corrected
version of $\gamma$. It was changed in \texttt{robustbase} version
\texttt{0.91} (April 2014) to ensure that the equation reduces to $1$ in
the classical case ($\psi(x) = x$). If the former (incorrect) version is
needed for compatibility reasons, it can be obtained by adding the argument
\texttt{cov.corrfact = "tauold"}.

\begin{equation*}
  \bld{\widehat V}_{\bld X} =
  \frac{1}{\frac{1}{n}\sum_{i=1}^n\wgt_{ii}}\bld X^T\bld W\bld X
\end{equation*}
where $\bld W = \diag\left(\wgt\left(\frac{r_1}{\hat\sigma}\right), \dots,
  \wgt\left(\frac{r_n}{\hat\sigma}\right)\right)$. The function $\wgt(r) =
\psi(r)/r$ produces the robustness weights.

\section{Simulation}
The main loop of the simulation is fairly simple. (This code is only run if
there are no aggregate results available.)
%% set eval to TRUE for chunks simulation-run and simulation-aggr
%% if you really want to run the simulations again.
%% (better fail with an error than run for weeks)
<<results=hide>>=
aggrResultsFile <- file.path(robustDta, "aggr_results.Rdata")
<<simulation-run,results=hide>>=
if (!file.exists(aggrResultsFile)) {
  ## load packages required only for simulation
  stopifnot(require(robust),
            require(skewt),
            require(foreach))
  if (!is.null(getOption("cores"))) {
      if (getOption("cores") == 1)
          registerDoSEQ() ## no not use parallel processing
      else {
          stopifnot(require(doParallel))
          if (.Platform$OS.type == "windows") {
              cl <- makeCluster(getOption("cores"))
              clusterExport(cl, c("N", "robustDoc"))
              clusterEvalQ(cl, slave <- TRUE)
              clusterEvalQ(cl, source(file.path(robustDoc, 'simulation.init.R')))
              registerDoParallel(cl)
          } else registerDoParallel()
      }
  } else registerDoSEQ() ## no not use parallel processing
  for (design in c("dd", ls(pattern = 'rand_\\d+_\\d+'))) {
    print(design)
    ## set design
    estlist$design <- get(design)
    estlist$use.intercept <- !grepl('^rand', design)
    ## add design.predict: pc
    estlist$design.predict <-
      if (is.null(attr(estlist$design, 'gen')))
        f.prediction.points(estlist$design) else
      f.prediction.points(estlist$design, max.pc = 2)

    filename <- file.path(robustDta,
                          sprintf('r.test.final.%s.Rdata',design))
    if (!file.exists(filename)) {
      ## run
      print(system.time(r.test <- f.sim(estlist, silent = TRUE)))
      ## save
      save(r.test, file=filename)
      ## delete output
      rm(r.test)
      ## run garbage collection
      gc()
    }
  }
}
@

The variable \T{estlist} is a list containing all the necessary
settings required to run the simulation as outlined above.  Most of its
elements are self-explanatory.
<<str-estlist>>=
str(estlist, 1)
@

\T{errs} is a list containing all the error distributions to be
simulated. The entry for the standard normal looks as follows.
<<estl-errs>>=
estlist$errs[[1]]
@
\T{err} is translated internally to the corresponding random generation or
quantile function, e.g., in this case \T{rnorm} or \T{qnorm}. \T{args}
is a list containing all the required arguments to call the
function. The errors are then generated internally with the following call.
<<show-errs,eval=FALSE>>=
set.seed(estlist$seed)
errs <- c(sapply(1:nrep, function(x) do.call(fun, c(n = nobs, args))))
@
All required random numbers are generated at once instead of during the
simulation. Like this, it is certain, that all the compared methods run on
exactly the same data.

The entry \T{procedures} follows a similar convention. \T{design.predict}
contains the design used for the prediction of observations and calculation
of confidence or prediction intervals. The objects returned by the
procedures are processed by the functions contained in the
\T{estlist\$output} list.
<<>>=
str(estlist$output[1:3], 2)
@
The results are stored in a 4-dimensional array. The dimensions are:
repetition number, type of value, procedure id, error id. Using \T{apply}
it is very easy and fast to generate summary statistics. The raw results
are stored on the hard disk, because typically it takes much longer to
execute all the procedures than to calculate the summary statistics. The
variables saved take up a lot of space quite quickly, so only the necessary
data is stored. These are $\sigma$, $\bld\beta$ as well as the
corresponding standard errors.

To speed up the simulation routine \T{f.sim}, the simulations are carried
out in parallel, as long as this is possible. This is accomplished with the
help of the \T{R}-package \T{foreach}. This is most easily done on a
machine with multiple processors or cores. The \T{multicore} package
provides the methods to do so easily. The worker processes are just forked
from the main \T{R} process.

After all the methods have been simulated, the simulation output is
processed. The code is quite lengthy and thus not displayed here (check the
Sweave source file \T{lmrob\_simulation.Rnw}). The
residuals, robustness weights, leverages and $\tau$ values have to be
recalculated. Using vectorized operations and some specialized \T{C} code,
this is quite cheap. The summary statistics generated are discussed in the
next section.

<<simulation-aggr, results=hide, echo=FALSE>>=
if (!file.exists(aggrResultsFile)) {
  files <- list.files(robustDta, pattern = 'r.test.final\\.')
  res <- foreach(file = files) %dopar% {
    ## get design, load r.test, initialize other stuff
    design <- substr(basename(file), 14, nchar(basename(file)) - 6)
    cat(design, ' ')
    load(file.path(robustDta, file))
    estlist <- attr(r.test, 'estlist')
    use.intercept <-
      if (!is.null(estlist$use.intercept)) estlist$use.intercept else TRUE
    sel <- dimnames(r.test)[[3]] ## [dimnames(r.test)[[3]] != "estname=lm"]
    n.betas <- paste('beta',1:(NCOL(estlist$design)+use.intercept),sep='_')
    ## get design
    lX <- if (use.intercept)
      as.matrix(cbind(1, get(design))) else as.matrix(get(design))
    n <- NROW(lX)
    p <- NCOL(lX)
    ## prepare arrays for variable designs and leverages
    if (is.function(attr(estlist$design, 'gen'))) {
      lXs <- array(NA, c(n, NCOL(lX), dim(r.test)[c(1, 4)]),
                   list(Obs = NULL, Pred = colnames(lX), Data = NULL,
                        Errstr = dimnames(r.test)[[4]]))
    }
    ## generate errors
    lerrs <- array(NA, c(n, dim(r.test)[c(1,4)]) ,
                   list(Obs = NULL, Data = NULL, Errstr = dimnames(r.test)[[4]]))
    for (i in 1:dim(lerrs)[3]) {
      lerrstr <- f.list2str(estlist$errs[[i]])
      lerr <- f.errs(estlist, estlist$errs[[i]],
                     gen = attr(estlist$design, 'gen'),
                     nobs = n, npar = NCOL(lX))
      lerrs[,,lerrstr] <- lerr
      if (!is.null(attr(lerr, 'designs'))) {
        ## retrieve generated designs: this returns a list of designs
        lXs[,,,i] <- unlist(attr(lerr, 'designs'))
        if (use.intercept)
          stop('intercept not implemented for random desings')
      }
      rm(lerr)
    }
    if (is.function(attr(estlist$design, 'gen'))) {
      ## calculate leverages
      lXlevs <- apply(lXs, 3:4, .lmrob.hat)
    }
    ## calculate fitted values from betas
    if (!is.function(attr(estlist$design, 'gen'))) { ## fixed design case
      lfitted <- apply(r.test[,n.betas,sel,,drop=FALSE],c(3:4),
                       function(bhat) { lX %*% t(bhat) } )
    } else { ## variable design case
      lfitted <- array(NA, n*prod(dim(r.test)[c(1,4)])*length(sel))
      lfitted <- .C('R_calc_fitted',
                    as.double(lXs), ## designs
                    as.double(r.test[,n.betas,sel,,drop=FALSE]), ## betas
                    as.double(lfitted), ## result
                    as.integer(n), ## n
                    as.integer(p), ## p
                    as.integer(dim(r.test)[1]), ## nrep
                    as.integer(length(sel)), ## n procstr
                    as.integer(dim(r.test)[4]), ## n errstr
                    DUP=FALSE, NAOK=TRUE, PACKAGE="robustbase")[[3]]
    }
    tdim <- dim(lfitted) <-
      c(n, dim(r.test)[1], length(sel),dim(r.test)[4])
    lfitted <- aperm(lfitted, c(1,2,4,3))
    ## calculate residuals = y - fitted.values
    lfitted <- as.vector(lerrs) - as.vector(lfitted)
    dim(lfitted) <- tdim[c(1,2,4,3)]
    lfitted <- aperm(lfitted, c(1,2,4,3))
    dimnames(lfitted) <-
      c(list(Obs = NULL), dimnames(r.test[,,sel,,drop=FALSE])[c(1,3,4)])
    lresids <- lfitted
    rm(lfitted)
    ## calculate lm MSE and trim trimmed MSE of betas
    tf.MSE <- function(lbetas) {
      lnrm <- rowSums(lbetas^2)
      c(MSE=mean(lnrm,na.rm=TRUE),MSE.1=mean(lnrm,trim=trim,na.rm=TRUE))
    }
    MSEs <- apply(r.test[,n.betas,,,drop=FALSE],3:4,tf.MSE)
    li <- 1 ## so we can reconstruct where we are
    lres <- apply(lresids,3:4,f.aggregate.results <- {
      function(lresid) {
        ## the counter li tells us, where we are
        ## we walk dimensions from left to right
        lcdn <- f.get.current.dimnames(li, dimnames(lresids), 3:4)
        lr <- r.test[,,lcdn[1],lcdn[2]]
        ## update counter
        li <<- li + 1
        ## transpose and normalize residuals with sigma
        lresid <- t(lresid) / lr[,'sigma']
        if (lcdn[1] != 'estname=lm') {
          ## convert procstr to proclst and get control list
          largs <- f.str2list(lcdn[1])[[1]]$args
          if (grepl('lm.robust', lcdn[1])) {
            lctrl <- list()
            lctrl$psi <- toupper(largs$weight2)
            lctrl$tuning.psi <-
              f.eff2c.psi(largs$efficiency, lctrl$psi)
            lctrl$method <- 'MM'
          } else {
            lctrl <- do.call('lmrob.control',largs)
          }
          ## calculate correction factors
          ## A
          lsp2 <- rowSums(Mpsi(lresid,lctrl$tuning.psi, lctrl$psi)^2)
          ## B
          lspp <- rowSums(lpp <- Mpsi(lresid,lctrl$tuning.psi, lctrl$psi,1))
          ## calculate Huber\'s small sample correction factor
          lK <- 1 + rowSums((lpp - lspp/n)^2)*NCOL(lX)/lspp^2 ## 1/n cancels
        } else {
          lK <- lspp <- lsp2 <- NA
        }
        ## only calculate tau variants if possible
        if (grepl('args.method=\\w*(D|T)\\w*\\b', lcdn[1])) { ## SMD or SMDM
          ## calculate robustness weights
          lwgts <- Mwgt(lresid, lctrl$tuning.psi, lctrl$psi)
          ## function to calculate robustified leverages
          tfun <-
            if (is.function(attr(estlist$design, 'gen')))
              function(i) {
                if (all(is.na(wi <- lwgts[i,]))) wi
                else .lmrob.hat(lXs[,,i,lcdn[2]],wi)
              }
            else
              function(i) {
                if (all(is.na(wi <- lwgts[i,]))) wi else .lmrob.hat(lX, wi)
              }
          llev <- sapply(1:dim(r.test)[1], tfun)
          ## calculate unique leverages
          lt <- robustbase:::lmrob.tau(list(),h=llev,control=lctrl)
          ## normalize residuals with tau (transpose lresid)
          lresid <- t(lresid) / lt
          ## A
          lsp2t <- colSums(Mpsi(lresid,lctrl$tuning.psi,
                                lctrl$psi)^2)
          ## B
          lsppt <- colSums(Mpsi(lresid,lctrl$tuning.psi,
                                                     lctrl$psi,1))
        } else {
          lsp2t <- lsppt <- NA
        }

        ## calculate raw scales based on the errors
        lproc <- f.str2list(lcdn[1])[[1]]
        q <- NA
        M <- NA
        if (lproc$estname == 'lmrob.mar' && lproc$args$type == 'qE') {
          ## for lmrob_mar, qE variant
          lctrl <- lmrob.control(psi = 'bisquare',
                                 tuning.chi=uniroot(function(c)
                                   robustbase:::lmrob.bp('bisquare', c) - (1-p/n)/2,
                                   c(1, 3))$root)
          se <- apply(lerrs[,,lcdn[2]],2,lmrob.mscale,control=lctrl,p=p)
          ltmp <- se/lr[,'sigma']
          q <- median(ltmp, na.rm = TRUE)
          M <- mad(ltmp, na.rm = TRUE)
        } else if (!is.null(lproc$args$method) && lproc$args$method == 'SMD') {
          ## for D-scales
          se <- apply(lerrs[,,lcdn[2]],2,lmrob.dscale,control=lctrl,
                      kappa=robustbase:::lmrob.kappa(control=lctrl))
          ltmp <- se/lr[,'sigma']
          q <- median(ltmp, na.rm = TRUE)
          M <- mad(ltmp, na.rm = TRUE)
        }

        ## calculate empirical correct test value (to yield 5% level)
        t.val_2 <- t.val_1 <- quantile(abs(lr[,'beta_1']/lr[,'se_1']), 0.95,
                                       na.rm = TRUE)
        if (p > 1) t.val_2 <- quantile(abs(lr[,'beta_2']/lr[,'se_2']), 0.95,
                                       na.rm = TRUE)

        ## return output: summary statistics:
        c(## gamma
          AdB2.1 = mean(lsp2/lspp^2,trim=trim,na.rm=TRUE)*n,
          K2AdB2.1 = mean(lK^2*lsp2/lspp^2,trim=trim,na.rm=TRUE)*n,
          AdB2t.1 = mean(lsp2t/lsppt^2,trim=trim,na.rm=TRUE)*n,
          sdAdB2.1 = sd.trim(lsp2/lspp^2*n,trim=trim,na.rm=TRUE),
          sdK2AdB2.1 = sd.trim(lK^2*lsp2/lspp^2*n,trim=trim,na.rm=TRUE),
          sdAdB2t.1 = sd.trim(lsp2t/lsppt^2*n,trim=trim,na.rm=TRUE),
          ## sigma
          medsigma = median(lr[,'sigma'],na.rm=TRUE),
          madsigma = mad(lr[,'sigma'],na.rm=TRUE),
          meansigma.1 = mean(lr[,'sigma'],trim=trim,na.rm=TRUE),
          sdsigma.1 = sd.trim(lr[,'sigma'],trim=trim,na.rm=TRUE),
          meanlogsigma = mean(log(lr[,'sigma']),na.rm=TRUE),
          meanlogsigma.1 = mean(log(lr[,'sigma']),trim=trim,na.rm=TRUE),
          sdlogsigma = sd(log(lr[,'sigma']),na.rm=TRUE),
          sdlogsigma.1 = sd.trim(log(lr[,'sigma']),trim=trim,na.rm=TRUE),
          q = q,
          M = M,
          ## beta
          efficiency.1 = MSEs['MSE.1','estname=lm',lcdn[2]] /
          MSEs['MSE.1',lcdn[1],lcdn[2]],
          ## t-value: level
          emplev_1 = mean(abs(lr[,'beta_1']/lr[,'se_1']) > qt(0.975, n - p),
            na.rm = TRUE),
          emplev_2 = if (p>1) {
            mean(abs(lr[,'beta_2']/lr[,'se_2']) > qt(0.975, n - p), na.rm = TRUE)
          } else NA,
          ## t-value: power
          power_1_0.2 = mean(abs(lr[,'beta_1']-0.2)/lr[,'se_1'] > t.val_1,
            na.rm = TRUE),
          power_2_0.2 = if (p>1) {
            mean(abs(lr[,'beta_2']-0.2)/lr[,'se_2'] > t.val_2, na.rm = TRUE)
          } else NA,
          power_1_0.4 = mean(abs(lr[,'beta_1']-0.4)/lr[,'se_1'] > t.val_1,
            na.rm = TRUE),
          power_2_0.4 = if (p>1) {
            mean(abs(lr[,'beta_2']-0.4)/lr[,'se_2'] > t.val_2, na.rm = TRUE)
          } else NA,
          power_1_0.6 = mean(abs(lr[,'beta_1']-0.6)/lr[,'se_1'] > t.val_1,
            na.rm = TRUE),
          power_2_0.6 = if (p>1) {
            mean(abs(lr[,'beta_2']-0.6)/lr[,'se_2'] > t.val_2, na.rm = TRUE)
          } else NA,
          power_1_0.8 = mean(abs(lr[,'beta_1']-0.8)/lr[,'se_1'] > t.val_1,
            na.rm = TRUE),
          power_2_0.8 = if (p>1) {
            mean(abs(lr[,'beta_2']-0.8)/lr[,'se_2'] > t.val_2, na.rm = TRUE)
          } else NA,
          power_1_1 = mean(abs(lr[,'beta_1']-1)/lr[,'se_1'] > t.val_1,
            na.rm = TRUE),
          power_2_1 = if (p>1) {
            mean(abs(lr[,'beta_2']-1)/lr[,'se_2'] > t.val_2, na.rm = TRUE)
          } else NA,
          ## coverage probability: calculate empirically
          ## the evaluation points are constant, but the designs change
          ## therefore this makes only sense for fixed designs
          cpr_1 = mean(lr[,'upr_1'] < 0 | lr[,'lwr_1'] > 0, na.rm = TRUE),
          cpr_2 = mean(lr[,'upr_2'] < 0 | lr[,'lwr_2'] > 0, na.rm = TRUE),
          cpr_3 = mean(lr[,'upr_3'] < 0 | lr[,'lwr_3'] > 0, na.rm = TRUE),
          cpr_4 = mean(lr[,'upr_4'] < 0 | lr[,'lwr_4'] > 0, na.rm = TRUE),
          cpr_5 = if (any(colnames(lr) == 'upr_5')) {
            mean(lr[,'upr_5'] < 0 | lr[,'lwr_5'] > 0, na.rm = TRUE) } else NA,
          cpr_6 = if (any(colnames(lr) == 'upr_6')) {
            mean(lr[,'upr_6'] < 0 | lr[,'lwr_6'] > 0, na.rm = TRUE) } else NA,
          cpr_7 = if (any(colnames(lr) == 'upr_7')) {
            mean(lr[,'upr_7'] < 0 | lr[,'lwr_7'] > 0, na.rm = TRUE) } else NA
          )
      }})

    ## convert to data.frame
    lres <- f.a2df.2(lres, split = '___NO___')
    ## add additional info
    lres$n <- NROW(lX)
    lres$p <- NCOL(lX)
    lres$nmpdn <- with(lres, (n-p)/n)
    lres$Design <- design

    ## clean up
    rm(r.test, lXs, lXlevs, lresids, lerrs)
    gc()
    ## return lres
    lres
  }
  save(res, trim, file = aggrResultsFile)
  ## stop cluster
  if (exists("cl")) stopCluster(cl)
}
<<simulation-aggr2,results=hide,echo=FALSE>>=
load(aggrResultsFile)
## this will fail if the file is not found (for a reason)
## set eval to TRUE for chunks simulation-run and simulation-aggr
## if you really want to run the simulations again.
## (better fail with an error than run for weeks)

## combine list elements to data.frame
test.1 <- do.call('rbind', res)
test.1 <- within(test.1, {
  Method[Method == "SM"] <- "MM"
  Method <- Method[, drop = TRUE]
  Estimator <- interaction(Method, D.type, drop = TRUE)
  Estimator <- f.rename.level(Estimator, 'MM.S', 'MM')
  Estimator <- f.rename.level(Estimator, 'SMD.D', 'SMD')
  Estimator <- f.rename.level(Estimator, 'SMDM.D', 'SMDM')
  Estimator <- f.rename.level(Estimator, 'MM.qT', 'MMqT')
  Estimator <- f.rename.level(Estimator, 'MM.qE', 'MMqE')
  Estimator <- f.rename.level(Estimator, 'MM.rob', 'MMrobust')
  Estimator <- f.rename.level(Estimator, 'lsq.lm', 'OLS')
  Est.Scale <- f.rename.level(Estimator, 'MM', 'sigma_S')
  Est.Scale <- f.rename.level(Est.Scale, 'MMrobust', 'sigma_robust')
  Est.Scale <- f.rename.level(Est.Scale, 'MMqE', 'sigma_S*qE')
  Est.Scale <- f.rename.level(Est.Scale, 'MMqT', 'sigma_S*qT')
  Est.Scale <- f.rename.level(Est.Scale, 'SMDM', 'sigma_D')
  Est.Scale <- f.rename.level(Est.Scale, 'SMD', 'sigma_D')
  Est.Scale <- f.rename.level(Est.Scale, 'OLS', 'sigma_OLS')
  Psi <- f.rename.level(Psi, 'hampel', 'Hampel')
})
## add interaction of Method and Cov
test.1 <- within(test.1, {
  method.cov <- interaction(Estimator, Cov, drop=TRUE)
  levels(method.cov) <-
    sub('\\.+vcov\\.(a?)[wacrv1]*', '\\1', levels(method.cov))
  method.cov <- f.rename.level(method.cov, "MMa", "MM.Avar1")
  method.cov <- f.rename.level(method.cov, "MMrobust.Default", "MMrobust.Wssc")
  method.cov <- f.rename.level(method.cov, "MM", "MM.Wssc")
  method.cov <- f.rename.level(method.cov, "SMD", "SMD.Wtau")
  method.cov <- f.rename.level(method.cov, "SMDM", "SMDM.Wtau")
  method.cov <- f.rename.level(method.cov, "MMqT", "MMqT.Wssc")
  method.cov <- f.rename.level(method.cov, "MMqE", "MMqE.Wssc")
  method.cov <- f.rename.level(method.cov, "OLS.Default", "OLS")
  ## ratio: the closest 'desired ratios' instead of exact p/n;
  ##        needed in plots only for stat_*(): median over "close" p/n's:
  ratio <- ratios[apply(abs(as.matrix(1/ratios) %*% t(as.matrix(p / n)) - 1),
                        2, which.min)]
})

## calculate expected values of psi^2 and psi'
test.1$Ep2 <- test.1$Epp <- NA
for(Procstr in levels(test.1$Procstr)) {
  args <- f.str2list(Procstr)[[1]]$args
  if (is.null(args)) next
  lctrl <- do.call('lmrob.control',args)
  test.1$Ep2[test.1$Procstr == Procstr] <-
    robustbase:::lmrob.E(psi(r)^2, lctrl, use.integrate = TRUE)
  test.1$Epp[test.1$Procstr == Procstr] <-
    robustbase:::lmrob.E(psi(r,1), lctrl, use.integrate = TRUE)
}
## drop some observations, separate fixed and random designs
test.fixed <- droplevels(subset(test.1, n == 20)) ## n = 20 -- fixed  design
test.1     <- droplevels(subset(test.1, n != 20)) ## n !=20 -- random designs
test.lm <- droplevels(subset(test.1, Function == 'lm')) # lm = OLS
test.1  <- droplevels(subset(test.1, Function != 'lm')) # Rob := all "robust"
test.lm$Psi <- NULL
test.lm.2 <- droplevels(subset(test.lm, Error == 'N(0,1)'))                   # OLS for N(*)
test.2    <- droplevels(subset(test.1,  Error == 'N(0,1)' & Function != 'lm'))# Rob for N(*)
## subsets
test.3 <- droplevels(subset(test.2, Method != 'SMDM'))# Rob, not SMDM  for N(*)
test.4 <- droplevels(subset(test.1, Method != 'SMDM'))# Rob, not SMDM  for all
@

\section{Simulation Results}
\subsection{Criteria}
The simulated methods are compared using the following criteria.

\textbf{Scale estimates.} The criteria for scale estimates are all
calculated on the log-scale. The bias of the estimators is measured by
the $\Sexpr{trim*100}\%$ trimmed mean. To recover a meaningful scale, the
results are exponentiated before plotting. It is easy to see that this is
equivalent to calculating geometric means. Since the methods are all
tuned at the central model, ${\mathcal N}(0,1)$, a meaningful comparison
of biases can only be made for ${\mathcal N}(0,1)$ distributed errors.

The variability of the estimators, on the other hand, can be compared
over all simulated error distributions. It is measured by the
$\Sexpr{trim*100}\%$ trimmed standard deviation, rescaled by the square
root of the number of observations.

For completeness, the statistics used to compare scale estimates in
\citet{maronna2009correcting} are also calculated. They are defined as
\begin{equation}
  \label{eq:def.q.and.M}
  q = \median\left(\frac{S(\bld e)}{\hat\sigma_S}\right), \quad
  M = \mad\left(\frac{S(\bld e)}{\hat\sigma_S}\right),
\end{equation}
where $S(e)$ stands for the S-scale estimate evaluated for the actual
errors $\bld e$. For the D-scale estimate, the definition is
analogue. Since there is no design to correct for, we set $\tau_i = 1\
\forall i$.

\textbf{Coefficients.}  The efficiency of estimated regression
coefficients $\bld{\hat\beta}$ is characterized by their mean squared
error (\emph{MSE}).  Since we simulate under $H_0: \bld\beta = 0$, this
is determined by the covariance matrix of $\bld{\hat\beta}$. We use
$\Erw\left[\norm{\bld{\hat\beta}}_2^2\right] = \sum_{j=1}^p
\var(\hat\beta_j)$ as a summary. When comparing to the MSE of the
ordinary least squares estimate (\emph{OLS}), this gives the efficiency,
which, by the choice of tuning constants of $\psi$, should yield
\begin{equation*}
  \frac{{\rm MSE}(\bld{\hat\beta}_{\rm OLS})}{{\rm MSE}(\bld{\hat\beta})}
  \approx 0.95
\end{equation*}
for standard normally distributed errors. The simulation mean of
$\sum_{j=1}^p \var(\hat\beta_j)$ is calculated with $\Sexpr{trim*100}\%$
trimming. For other error distributions, this ratio should be larger than
$1$, since by using robust procedures we expect to gain efficiency at
other error distributions (relative to the least squares estimate).

$\bld\gamma$\textbf{.} We compare the behavior of the various estimators of
$\gamma$ by calculating the trimmed mean and the trimmed standard
deviation for standard normal distributed errors.

\textbf{Covariance matrix estimate.} The covariance matrix estimates
are compared indirectly over the performance of the resulting test
statistics. We compare the empirical level of the hypothesis tests $H_0:
\beta_j = 0$ for some $j \in \{1,\dots, p\}$. The power of the tests is
compared by testing for $H_0: \beta_j = b$ for several values of
$b>0$. The formal power of a more liberal test is generally
higher. Therefore, in order for this comparison to be meaningful, the
critical value for each test statistic was corrected such that all tests
have the same simulated level of $5\%$.

The simple hypothesis tests give only limited insights. To investigate
the effects of other error distributions, e.g., asymmetric error
distributions, we compare the confidence intervals for the prediction of
some fixed points. Since it was not clear how to assess the quality
prediction intervals, either at the central or the simulated model, we do
not calculate them here.

A small number of prediction points is already enough, if they  are
chosen properly. We chose to use seven points lying on the first two
principal components, spaced evenly from the center of the design used to
the extended range of the design. The principal components were
calculated robustly (using \T{covMcd} of the \T{robustbase} package) and
the range was extended by a fraction of $0.5$. An example is shown in
Figure~\ref{fig:design-predict}.


\subsection{Results}
The results are given here as plots (Fig.~\ref{fig:meanscale-1} to
Fig.~\ref{fig:cpr}). For a complete discussion of the results, we refer to
\citet{KS2011}.

The different $\psi$-functions are each plotted in a different facet,
except for Fig.~\ref{fig:qscale-all}, Fig.~\ref{fig:Mscale-all} and
Fig.~\ref{fig:lqq-level}, where the facets show the results for various
error distributions. The plots are augmented with auxiliary lines to ease
the comparison of the methods. The lines connect the median values over the
values of $n$ for each simulated ratio $p/n$. In many plots the y-axis has
been truncated. Points in the grey shaded area represent truncated values
using a different scale.

\begin{figure}
\begin{center}
<<fig-meanscale, fig=TRUE, echo=FALSE>>=
## ## exp(mean(log(sigma))): this looks almost identical to mean(sigma)
print(ggplot(test.3, aes(p/n, exp(meanlogsigma.1), color = Est.Scale)) +
      stat_summary(aes(x=ratio), # <- "rounded p/n": --> median over "neighborhood"
                   fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      geom_hline(yintercept = 1) +
      g.scale_y_log10_1() +
      facet_wrap(~ Psi) +
      ylab(quote('geometric ' ~ mean(hat(sigma)))) +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.", labels=lab(test.3$Est.Scale)))
@
\end{center}
\caption{Mean of scale estimates for normal errors. The mean is calculated
  with $\Sexpr{trim*100}\%$ trimming. The lines connect the median values
  for each simulated ratio $p/n$. Results for random designs only. }
\label{fig:meanscale-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-sdscale-1, fig=TRUE, echo=FALSE>>=
print(ggplot(test.3, aes(p/n, sdlogsigma.1*sqrt(n), color = Est.Scale)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      ylab(quote(sd(log(hat(sigma)))*sqrt(n))) +
      facet_wrap(~ Psi) +
      geom_point  (data=test.lm.2, alpha=alpha.n, aes(color = Est.Scale)) +
      stat_summary(data=test.lm.2, aes(x=ratio, color = Est.Scale),
                   fun = median, geom='line') +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.",
                            labels= lab(test.3   $Est.Scale,
                                        test.lm.2$Est.Scale)))
@
\end{center}
\caption{Variability of the scale estimates for normal errors. The standard
  deviation is calculated with $\Sexpr{trim*100}\%$ trimming.
}
\label{fig:sdscale-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-sdscale-all, fig=TRUE, echo=FALSE>>=
print(ggplot(test.4,
             aes(p/n, sdlogsigma.1*sqrt(n), color = Est.Scale)) +
      ylim(with(test.4, range(sdlogsigma.1*sqrt(n)))) +
      ylab(quote(sd(log(hat(sigma)))*sqrt(n))) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = Error), alpha = alpha.error) +
      facet_wrap(~ Psi) +
      ## "FIXME" (?): the next 'test.lm' one  give warnings
      geom_point  (data=test.lm, aes(color = Est.Scale), alpha=alpha.n) +
      ##-> Warning: Removed 108 rows containing missing values    (geom_point).
      stat_summary(data=test.lm, aes(x = ratio, color = Est.Scale),
                   fun = median, geom='line') +
      ##-> Warning: Removed 108 rows containing non-finite values (stat_summary).
      g.scale_shape(labels=lab(test.4$Error)) +
      scale_colour_discrete("Scale Est.",
                            labels=lab(test.4 $Est.Scale,
                                       test.lm$Est.Scale)))
@
\end{center}
\caption{Variability of the scale estimates for all simulated error distributions.}
\label{fig:sdscale-all}
\end{figure}

\begin{figure}
\begin{center}
<<fig-qscale, fig=TRUE, echo=FALSE>>=
t3est2 <- droplevels(subset(test.3, Estimator %in% c("SMD", "MMqE")))
print(ggplot(t3est2,
             aes(p/n, q, color = Est.Scale)) + ylab(quote(q)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      geom_hline(yintercept = 1) +
      g.scale_y_log10_1() +
      facet_wrap(~ Psi) +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.", labels=lab(t3est2$Est.Scale)))
@
\end{center}
\caption{$q$ statistic for normal errors. $q$ is defined in \eqref{eq:def.q.and.M}.}
\label{fig:qscale-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-Mscale, fig=TRUE, echo=FALSE>>=
print(ggplot(t3est2,
             aes(p/n, M/q, color = Est.Scale)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      g.scale_y_log10_0.05() +
      facet_wrap(~ Psi) +
      ylab(quote(M/q)) +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.", labels=lab(t3est2$Est.Scale)))
@
\end{center}
\caption{$M/q$ statistic for normal errors. $M$ and $q$ are defined in
  \eqref{eq:def.q.and.M}.}
\label{fig:Mscale-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-qscale-all, fig=TRUE, echo=FALSE>>=
t1.bi <- droplevels(subset(test.1, Estimator %in% c("SMD", "MMqE") &
                                   Psi == 'bisquare'))
print(ggplot(t1.bi,
             aes(p/n, q, color = Est.Scale)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      geom_hline(yintercept = 1) +
      g.scale_y_log10_1() +
      facet_wrap(~ Error) + ## labeller missing!
      ylab(quote(q)) +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.", labels=lab(tmp$Est.Scale)),
      legend.mod = legend.mod)
@
\end{center}
\caption{$q$ statistic for \emph{bisquare} $\psi$.
}
\label{fig:qscale-all}
\end{figure}


\begin{figure}
\begin{center}
<<fig-Mscale-all, fig=TRUE, echo=FALSE>>=
print(ggplot(t1.bi,
             aes(p/n, M/q, color = Est.Scale)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      g.scale_y_log10_0.05() +
      facet_wrap(~ Error) +
      ylab(quote(M/q)) +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete("Scale Est.", labels=lab(tmp$Est.Scale)),
      legend.mod = legend.mod)
@
\end{center}
\caption{$M/q$ statistic for \emph{bisquare} $\psi$.
}
\label{fig:Mscale-all}
\end{figure}

\clearpage% not nice, but needed against  LaTeX Error: Too many unprocessed floats.

\begin{figure}
\begin{center}
<<fig-efficiency, fig=TRUE, echo=FALSE>>=
print(ggplot(test.2, aes(p/n, efficiency.1, color = Estimator)) +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      geom_hline(yintercept = 0.95) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      facet_wrap(~ Psi) +
      ylab(quote('efficiency of' ~~ hat(beta))) +
      g.scale_shape(quote(n)) +
      scale_colour_discrete(name = "Estimator",
                            labels = lab(test.2$Estimator)))
@
\end{center}
\caption{Efficiency for normal errors. The efficiency
  is calculated by comparing to an OLS estimate and averaging with
  $\Sexpr{trim*100}\%$ trimming.
}
\label{fig:efficiency}
\end{figure}

\begin{figure}
\begin{center}
<<fig-efficiency-all, fig=TRUE, echo=FALSE>>=
t.1xt1 <- droplevels(subset(test.1, Error != 't1'))
print(ggplot(t.1xt1,
             aes(p/n, efficiency.1, color = Estimator)) +
      ylab(quote('efficiency of '~hat(beta))) +
      geom_point(aes(shape = Error), alpha = alpha.error) +
      geom_hline(yintercept = 0.95) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      g.scale_shape(values=c(16,17,15,3,7,8,9,1,2,4)[-4],
                    labels=lab(t.1xt1$Error)) +
      facet_wrap(~ Psi) +
      scale_colour_discrete(name = "Estimator",
                            labels = lab(t.1xt1$Estimator)))
@
\end{center}
\caption{Efficiency for all simulated error distributions except $t_1$.
}
\label{fig:efficiency-all}
\end{figure}

\begin{figure}
\begin{center}
<<fig-AdB2-1, fig=TRUE, echo=FALSE>>=
t.2o. <- droplevels(subset(test.2, !is.na(AdB2t.1)))
print(ggplot(t.2o., aes(p/n, AdB2.1/(1-p/n), color = Estimator)) +
      geom_point(aes(shape=factor(n)),    alpha = alpha.n) +
      geom_point(aes(y=K2AdB2.1/(1-p/n)), alpha = alpha.n) +
      geom_point(aes(y=AdB2t.1),          alpha = alpha.n) +
      stat_summary(aes(x=ratio),                     fun = median, geom='line') +
      stat_summary(aes(x=ratio, y=K2AdB2.1/(1-p/n)), fun = median, geom='line', linetype=2) +
      stat_summary(aes(x=ratio, y=AdB2t.1),          fun = median, geom='line', linetype=3) +
      geom_hline(yintercept = 1/0.95) +
      g.scale_y_log10_1() +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete(name = "Estimator", labels = lab(t.2o.$Estimator)) +
      ylab(quote(mean(hat(gamma)))) +
      facet_wrap(~ Psi))
@
\end{center}
\caption{Comparing the estimates of $\gamma$. The solid line connects the
  uncorrected estimate, dotted the $\tau$ corrected estimate and
  dashed Huber's small sample correction.
}
\label{fig:AdB2-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-sdAdB2-1, fig=TRUE, echo=FALSE>>=
t.2ok <- droplevels(subset(test.2, !is.na(sdAdB2t.1)))
print(ggplot(t.2ok,
             aes(p/n, sdAdB2.1/(1-p/n), color = Estimator)) +
      geom_point(aes(shape=factor(n)),      alpha = alpha.n) +
      geom_point(aes(y=sdK2AdB2.1/(1-p/n)), alpha = alpha.n) +
      geom_point(aes(y=sdAdB2t.1),          alpha = alpha.n) +
      stat_summary(aes(x=ratio),                       fun = median, geom='line') +
      stat_summary(aes(x=ratio, y=sdK2AdB2.1/(1-p/n)), fun = median, geom='line', linetype= 2) +
      stat_summary(aes(x=ratio, y=sdAdB2t.1),          fun = median, geom='line', linetype= 3) +
      g.scale_y_log10_0.05() +
      scale_shape_discrete(quote(n)) +
      scale_colour_discrete(name = "Estimator", labels=lab(t.2ok$Estimator))  +
      ylab(quote(sd(hat(gamma)))) +
      facet_wrap(~ Psi))
@
\end{center}
\caption{Comparing the estimates of $\gamma$. The solid line connects the
  uncorrected estimate, dotted the $\tau$ corrected estimate and
  dashed Huber's small sample correction.
}
\label{fig:sdAdB2-1}
\end{figure}

\begin{figure}
\begin{center}
<<fig-emp-level,fig=TRUE,echo=FALSE>>=
t.2en0 <- droplevels(subset(test.2, emplev_1 != 0))
print(ggplot(t.2en0,
             aes(p/n, f.truncate(emplev_1), color = method.cov)) +
      g.truncate.lines + g.truncate.areas +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      scale_shape_discrete(quote(n)) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_hline(yintercept = 0.05) +
      g.scale_y_log10_0.05() +
      scale_colour_discrete(name = "Estimator", labels=lab(t.2en0$method.cov))  +
      ylab(quote("empirical level "~ list (H[0] : beta[1] == 0) )) +
      facet_wrap(~ Psi))
@
\end{center}
\caption{Empirical levels of test $H_0: \beta_1 = 0$ for normal errors. The
  y-values are truncated at $\Sexpr{trunc[1]}$ and $\Sexpr{trunc[2]}$.
}
\label{fig:emp-level}
\end{figure}

\begin{figure}
\begin{center}
<<fig-lqq-level, fig=TRUE, echo=FALSE>>=
tmp <- droplevels(subset(test.1, Psi == 'lqq' & emplev_1 != 0))
print(ggplot(tmp, aes(p/n, f.truncate(emplev_1), color = method.cov)) +
      ylab(quote("empirical level "~ list (H[0] : beta[1] == 0) )) +
      g.truncate.line + g.truncate.area +
      geom_point(aes(shape = factor(n)), alpha = alpha.n) +
      stat_summary(aes(x=ratio), fun = median, geom='line') +
      geom_hline(yintercept = 0.05) +
      g.scale_y_log10_0.05() +
      g.scale_shape(quote(n)) +
      scale_colour_discrete(name = "Estimator", labels=lab(tmp$method.cov)) +
      facet_wrap(~ Error)
     ,
      legend.mod = legend.mod
      )
@
\end{center}
\caption{Empirical levels of test $H_0: \beta_1 = 0$ for \emph{lqq}
  $\psi$-function and different error distributions.
}
\label{fig:lqq-level}
\end{figure}


\begin{figure}
\begin{center}
<<fig-power-1-0_2, fig=TRUE, echo=FALSE>>=
t2.25  <- droplevels(subset(test.2,    n == 25))# <-- fixed n ==> no need for 'ratio'
tL2.25 <- droplevels(subset(test.lm.2, n == 25))
scale_col_D2.25 <- scale_colour_discrete(name = "Estimator (Cov. Est.)",
                                         labels=lab(t2.25 $method.cov,
                                                    tL2.25$method.cov))
print(ggplot(t2.25,
             aes(p/n, power_1_0.2, color = method.cov)) +
      ylab(quote("empirical power "~ list (H[0] : beta[1] == 0.2) )) +
      geom_point(# aes(shape = Error),
          alpha = alpha.error) +
      stat_summary(fun = median, geom='line') +
      geom_point  (data=tL2.25, alpha = alpha.n) +
      stat_summary(data=tL2.25, fun = median, geom='line') +
      ## g.scale_shape("Error", labels=lab(t2.25$Error)) +
      scale_col_D2.25 +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical power of test $H_0: \beta_1 = 0.2$ for different
  $\psi$-functions. Results for $n = 25$ and normal errors only.
}
\label{fig:power-1-0_2}
\end{figure}

\begin{figure}
\begin{center}
<<fig-power-1-0_4, fig=TRUE, echo=FALSE>>=
print(ggplot(t2.25,
             aes(p/n, power_1_0.4, color = method.cov)) +
      ylab(quote("empirical power "~ list (H[0] : beta[1] == 0.4) )) +
      geom_point(alpha = alpha.error) +
      stat_summary(fun = median, geom='line') +
      geom_point  (data=tL2.25, alpha = alpha.n) +
      stat_summary(data=tL2.25,
                   fun = median, geom='line') +
      ## g.scale_shape("Error", labels=lab(t2.25$Error)) +
      scale_col_D2.25 +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical power of test $H_0: \beta_1 = 0.4$ for different
  $\psi$-functions. Results for $n = 25$ and normal errors only.
}
\label{fig:power-1-0_4}
\end{figure}

\begin{figure}
\begin{center}
<<fig-power-1-0_6, fig=TRUE, echo=FALSE>>=
print(ggplot(t2.25,
             aes(p/n, power_1_0.6, color = method.cov)) +
      ylab(quote("empirical power "~ list (H[0] : beta[1] == 0.6) )) +
      geom_point(# aes(shape = Error),
          alpha = alpha.error) +
      stat_summary(fun = median, geom='line') +
      geom_point  (data=tL2.25, alpha = alpha.n) +
      stat_summary(data=tL2.25, fun = median, geom='line') +
      scale_col_D2.25 +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical power of test $H_0: \beta_1 = 0.6$ for different
  $\psi$-functions. Results for $n = 25$ and normal errors only.
}
\label{fig:power-1-0_6}
\end{figure}

\begin{figure}
\begin{center}
<<fig-power-1-0_8, fig=TRUE, echo=FALSE>>=
print(ggplot(t2.25,
             aes(p/n, power_1_0.8, color = method.cov)) +
      ylab(quote("empirical power "~ list (H[0] : beta[1] == 0.8) )) +
      geom_point(alpha = alpha.error) +
      stat_summary(fun = median, geom='line') +
      geom_point  (data=tL2.25, alpha = alpha.n) +
      stat_summary(data=tL2.25, fun = median, geom='line') +
      g.scale_shape("Error", labels=lab(t2.25$Error)) +
      scale_col_D2.25 +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical power of test $H_0: \beta_1 = 0.8$ for different
  $\psi$-functions. Results for $n = 25$ and normal errors only.
}
\label{fig:power-1-0_8}
\end{figure}

\begin{figure}
\begin{center}
<<fig-power-1-1, fig=TRUE, echo=FALSE>>=
print(ggplot(t2.25,
             aes(p/n, power_1_1, color = method.cov)) +
      ylab(quote("empirical power "~ list (H[0] : beta[1] == 1) )) +
      geom_point(alpha = alpha.error) +
      stat_summary(fun = median, geom='line') +
      geom_point  (data=tL2.25, alpha = alpha.n) +
      stat_summary(data=tL2.25, fun = median, geom='line') +
      ## g.scale_shape("Error", labels=lab(t2.25$Error)) +
      scale_col_D2.25 +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical power of test $H_0: \beta_1 = 1$ for different
  $\psi$-functions. Results for $n = 25$ and normal errors only.
}
\label{fig:power-1-1}
\end{figure}

%\clearpage

\begin{figure}
\begin{center}
%% now (2016-11 GGally) works --- but fails with new 2018-05 ggplot2:
<<fig-pred-points, fig=TRUE, echo=FALSE>>=
pp <- f.prediction.points(dd)[1:7,]
## Worked in older ggplot2 -- now  plotmatrix() is gone, to be replaced by GGally::ggpairs):
## tmp <- plotmatrix(pp)$data
## tmp$label <- as.character(1:7)
## print(plotmatrix(dd) + geom_text(data=tmp, color = 2, aes(label=label), size = 2.5))
if(FALSE) {
tmp <- ggpairs(pp)$data
tmp$label <- as.character(1:7) # and now?
}
## ggpairs() + geom_text()  does *NOT* work {ggpairs has own class}
## print(ggpairs(dd) + geom_text(data=tmp, color = 2, aes(label=label), size = 2.5))
try( ## fails with old GGally and new  packageVersion("ggplot2") >= "2.2.1.9000"
print( ggpairs(dd) )## now (2016-11) fine
)
@
\end{center}
\caption{Prediction points for fixed design. The black points are the
  points of the original design. The red digits indicate the numbers and
  locations of the points where predictions are taken.}
\label{fig:design-predict}
\end{figure}


\begin{figure}
\begin{center}
<<fig-cpr, fig=TRUE,echo=FALSE>>=
n.cprs <- names(test.fixed)[grep('cpr', names(test.fixed))] # test.fixed: n=20 => no 'x=ratio'
test.5 <- melt(test.fixed[,c('method.cov', 'Error', 'Psi', n.cprs)])
test.5 <- within(test.5, {
  Point <- as.numeric(do.call('rbind', strsplit(levels(variable), '_'))[,2])[variable]
})
print(ggplot(test.5,
             aes(Point, f.truncate(value), color = method.cov)) +
      geom_point(aes(shape = Error), alpha = alpha.error) +
      g.truncate.line + g.truncate.area +
      stat_summary(fun = median, geom='line') +
      geom_hline(yintercept = 0.05) +
      g.scale_y_log10_0.05() +
      g.scale_shape(labels=lab(test.5$Error)) +
      scale_colour_discrete(name = "Estimator (Cov. Est.)",
                            labels=lab(test.5$method.cov)) +
      ylab("empirical level of confidence intervals") +
      facet_wrap(~ Psi)
      )
@
\end{center}
\caption{Empirical coverage probabilities. Results for fixed design. The
  y-values are truncated at $\Sexpr{trunc[2]}$.
}
\label{fig:cpr}
\end{figure}


\clearpage

\section{Maximum Asymptotic Bias}
\label{sec:maximum-asymptotic-bias}

The slower redescending $\psi$-functions come with higher asymptotic bias
as illustrated in Fig.~\ref{fig:max-asymptotic-bias}. We calculate the
asymptotic bias as in \citet{berrendero2007maximum}.

<<maxbias-fn, results=hide,echo=FALSE>>=
## Henning (1994) eq 33:
g <- Vectorize(function(s, theta, mu, ...) {
  lctrl <- lmrob.control(...)
  rho <- function(x)
    Mchi(x, lctrl$tuning.chi, lctrl$psi, deriv = 0)
  integrate(function(x) rho(((1 + theta^2)/s^2*x)^2)*dchisq(x, 1, mu^2/(1 + theta^2)),
            -Inf, Inf)$value
})
## Martin et al 1989 Section 3.2: for mu = 0
g.2 <- Vectorize(function(s, theta, mu, ...) {
  lctrl <- lmrob.control(...)
  lctrl$tuning.psi <- lctrl$tuning.chi
  robustbase:::lmrob.E(chi(sqrt(1 + theta^2)/s*r), lctrl, use.integrate = TRUE)})
g.2.MM <- Vectorize(function(s, theta, mu, ...) {
  lctrl <- lmrob.control(...)
  robustbase:::lmrob.E(chi(sqrt(1 + theta^2)/s*r), lctrl, use.integrate = TRUE)})
## Henning (1994) eq 30, one parameter case
g.3 <- Vectorize(function(s, theta, mu, ...) {
  lctrl <- lmrob.control(...)
  rho <- function(x)
    Mchi(x, lctrl$tuning.chi, lctrl$psi, deriv = 0)
  int.x <- Vectorize(function(y) {
    integrate(function(x) rho((y - x*theta - mu)/s)*dnorm(x)*dnorm(y),-Inf, Inf)$value })
  integrate(int.x,-Inf, Inf)$value
})
inv.g1 <- function(value, theta, mu, ...) {
  g <- if (mu == 0) g.2 else g.3
  uniroot(function(s) g(s, theta, mu, ...) - value, c(0.1, 100))$root
}
inv.g1.MM <- function(value, theta, mu, ...) {
  g <- if (mu == 0) g.2.MM else g.3.MM
  ret <- tryCatch(uniroot(function(s) g(s, theta, mu, ...) - value, c(0.01, 100)),
                  error = function(e)e)
  if (inherits(ret, 'error')) {
    warning('inv.g1.MM: ', value, ' ', theta, ' ', mu,' -> Error: ', ret$message)
    NA
  } else {
    ret$root
  }
}
s.min <- function(epsilon, ...) inv.g1(0.5/(1 - epsilon), 0, 0, ...)
s.max <- function(epsilon, ...) inv.g1((0.5-epsilon)/(1-epsilon), 0, 0, ...)

BS <- Vectorize(function(epsilon, ...) {
  sqrt(s.max(epsilon, ...)/s.min(epsilon, ...)^2 - 1) })

l <- Vectorize(function(epsilon, ...) {
  sigma_be <- s.max(epsilon, ...)
  sqrt((sigma_be/inv.g1.MM(g.2.MM(sigma_be,0,0,...) +
                           epsilon/(1-epsilon),0,0,...))^2 - 1) })
u <- Vectorize(function(epsilon, ...) {
  gamma_be <- s.min(epsilon, ...)
  max(l(epsilon, ...),
      sqrt((gamma_be/inv.g1.MM(g.2.MM(gamma_be,0,0,...) +
                               epsilon/(1-epsilon),0,0,...))^2 - 1)) })
@

\begin{figure}[h!]
\begin{center}
<<max-asymptotic-bias,echo=FALSE>>=
asymptMBFile <- file.path(robustDta, 'asymptotic.max.bias.Rdata')
if (!file.exists(asymptMBFile)) {
  x <- seq(0, 0.35, length.out = 100)
  rmb <- rbind(data.frame(l=l(x, psi = 'hampel'),
                          u=u(x, psi = 'hampel'), psi = 'Hampel'),
               data.frame(l=l(x, psi = 'lqq'),
                          u=u(x, psi = 'lqq'), psi = 'lqq'),
               data.frame(l=l(x, psi = 'bisquare'),
                          u=u(x, psi = 'bisquare'), psi = 'bisquare'),
               data.frame(l=l(x, psi = 'optimal'),
                          u=u(x, psi = 'optimal'), psi = 'optimal'))
  rmb$x <- x
  save(rmb, file=asymptMBFile)
} else load(asymptMBFile)
<<fig-max-asymptotic-bias,fig=TRUE,echo=FALSE>>=
print(ggplot(rmb, aes(x, l, color=psi)) + geom_line() +
        geom_line(aes(x, u, color=psi), linetype = 2) +
      xlab(quote("amount of contamination" ~~ epsilon)) +
      ylab("maximum asymptotic bias bounds") +
      coord_cartesian(ylim = c(0,10)) +
      scale_y_continuous(breaks = 1:10) +
      scale_colour_hue(quote(psi ~ '-function')))
@
\end{center}
\caption{Maximum asymptotic bias bound for the $\psi$-functions used in the
  simulation. Solid line: lower bound. Dashed line: upper bound.}
\label{fig:max-asymptotic-bias}
\end{figure}

\bibliographystyle{chicago}
\bibliography{robustbase}

\end{document}
